Compound

Compound Exhaust Valve

Nominal Diameter:DN65-DN200
Nominal Pressure:PN10-PN16
Body Material:Ductile iron,Cast steel
Applied Service:Clean Water, etc

Products Introduction

This series of composite exhaust valves are suitable for installation in the pump outlet or water delivery and distribution pipelines. lt is used to remove a large amount of air accumulated in the pipeline, or the trace air accumulated in the higher part of the pipeline is discharged into the atmosphere to improve the efficiency of the pipeline and the pump, Once there is a negative pressure in the pipe,the valve quick sucks in outside air. To protect the pipeline from damage caused by negative pressure.


Similar Product

Flexible

Flexible Rubber Joint

Nominal Diameter:DN50-DN3000
Nominal Pressure:PN10-PN25
Temperature Range:0℃-80℃
Applied Service:Water,Air,Oil, etc.
Manufacture Design:GB,JIS,ANSI,BSEN,ISO,DIN
Flange Dimension:Carbon Steel,Stainless Steel
Test and Inspection:CJ/T 208-2005

Double

Double Flange Transmission Connector

Nominal Diameter:DN65-DN3200
Nominal Pressure:PN10-PN25
Body Material:Ductile lron ,Carbon Steel
Temperature Range:0°C-80°C
Applied Service:Normal Temperature Water
Manufacture Design:GB,JIS,ANSI,BSEN,ISO,DIN
Test and Inspection:GB/T12465-2007/GB/T13927-2008

Double

Double Flanged Limit Expansion Joint

Nominal Diameter:DN65-DN3200
Nominal Pressure:PN10-PN25
Body Material:Ductile lron ,Carbon Steel
Packing:Ductile lron ,Carbon Steel
Temperature Range:0°C~80°C
Applied Service:Normal Temperature Water
Manufacture Design:GB/JIS/ANSI/BSEN/ISO/DIN
Test and Inspection:GB/T12465-2007/GB/T13927-2008

Multi-functional

Multi-functional Pump Control Valve

Nominal Diameter:DN50-DN1000
Nominal Pressure:PN10/PN16/PN25/150LB/10K/16K
Body Material:Ductile lron,Carbon Steel,Stainless Steel
Bonnet Material:Ductile lron,Carbon Steel,Stainless Steel
Stem Material:Ductile lron,Carbon Steel ,Stainless Steel
Seat Material:Ductile lron,Carbon Steel ,Stainless Steel
Temperature Range:0°C-80°C
Applied Service:Normal Temperature Water
Manufacture Design:GB,JIS,ANSI,BSEN,ISO,DIN
Test and Inspection:CJ/T 219-2005